1016mm Water Treatment Consumables Membrane Ulp-8040 for Industrial Water Filter

• Customization: Available
• Membrane Type: Hollow
• Type: RO
• Model NO.: ULP-8040
• Rejection Rate: 99%
• Filter Length: 10 -- 11 Inches
• Usage: Can Be Equipped with Water Cooler Dispenser
• Connections: Fast Connections or Customized
• Fitting: Quick Fitting
• Shape: I Shape
• Filtration Stage: Can Be Customized
• Transport Package: Carton + Polyfoam + Plastic Bag + Belt
• Specification: 1016 MM
• Trademark: DROPCLEAR or OEM, ODM brand
• Origin: Shenzhen, China
• HS Code: 84212110
• Production Capacity: 100000 PCS/Year

Product Description

ULP-8040 Industrial Water Filter RO Membrane Water Treatment System
 

ULP series membrane elements are suitable for desalination treatment of water sources such as RO water with a salt content of less than 2000ppm, groundwater, tap water and municipal water. They are mainly used in various scales of pure water, boiler feed water, food processing and pharmaceutical manufacturing industries, etc. Various fields.
 

ULP series is an ultra-low pressure aromatic polyamide composite membrane element developed by the company for desalination of tap water and groundwater. It can achieve the same high water flux and high desalination rate as conventional low-pressure membranes under ultra-low operating pressure conditions. Its operating pressure is about 2/3 of the operating pressure of conventional low-pressure composite membranes, thereby reducing the investment costs of related pumps, pipelines, containers and other equipment and the operating costs of reverse osmosis systems, and improving economic benefits.
 

Model	Effective membrane area ft (m^2)	Average water production GPD(m³/D)	Stable rejection rate %	Minimum rejection rate %
ULP-8040	400 (37.2)	10500(40)	99.3	99
Test Conditions	Test pressure	225psi (1.55Mpa)	Test solution temperature	25ºC
	Test solution concentration(NaC1)	2000ppm	PH value of test solution	8
	Single membrane element recovery rate	15%
Extreme conditions of use	Maximum working pressure	41bar (600psi)	Chemical cleaning PH range	1-13
	Highest Operating temperature	45ºC	Maximum influent SDI value	5
	Maximum pressure drop of a single membrane element	1.0bar	Allowable free chlorine content	<0.1ppm
	Continuous operating PH range	2~11

 

Remark

1. The water production rate listed in the table is the average value, and the error of the water production rate of a single membrane element is ±15%.
2. It is forbidden to add any chemical agents that affect the membrane elements during storage and operation. If such chemicals are used in violation, the company will not bear all the consequences arising therefrom.
3. Due to technological progress and product replacement, product information may change at any time without prior notice.
4. Before the living membrane element leaves the factory, the dry membrane element has no protective solution, and the wet membrane element is stored with 1.0% sodium bisulfite (add 10% glycerol antifreeze in winter) solution and vacuum packaged.
5. Dry membrane elements should always be kept moist after wetting; when wet membrane elements are not used for a long time, in order to prevent the growth of microorganisms. It is recommended to soak the membrane element with a protective solution (prepared with RO permeate water) containing 1.0% sodium bisulfite (food grade).
6. When the membrane element is used for the first time, it is recommended to wash at low pressure for 15-25 minutes (it is not suitable to soak or soak overnight), and then wash at high pressure for 60-90 minutes (the water production rate is not less than 50% of the system design water production rate). The product water and concentrated water in the first hour of the initial operation of the membrane element should be completely discharged.

* Pictures of RO 8040 Membrane :